what modle is this

[gav00]

this is a boat that was a b-day present from a mate
and i am trying it find out what it is 33'' long
i was going to put a nitro rotery engine in it but it became a headack
so i was thinking of youing 2 electric outbords any advice would be grate
thanks

[sailr]

Looks like a bad copy of a Delta Force Cyber Storm 33

[gav00]

is it worth doing any thing with or do i scrap it?

[sailr]

It will probably run OK. The hatch is what looks like a bad copy. I have the same boat set up for P mono with a NEU 1515/1Y on 4S. It's a screamer!

[gav00]

so what do you think of running 2x outbords ?

[sailr]

I wouldn't. First, there isn't room on the transom for mounts. Second, total pain in the butt to set up, etc.

[gav00]

cool thanks for your info

i am a total newbe to the hole electric thing can you point me in
the direction you think i need to head?

[Make-a-Wake]

From the looks of it, I have a 39" version and it runs great...................

[sailr]

Does the boat have a motor in it now....or at least a motor mount? How about a speed control?

Take and post some pics of the inside of the boat and also closeups of the hardware (rudder, strut, etc.)

[ray schrauwen]

The strut is set below the hull and really isn't a great idea. Really, some standard hardware from Speedmaster would be much better.

[gav00]

ok so the boat is empty i have the rails but not glued in
the rudder at the back looks to big to me
i need to make a shoping list.
the hole electric thing is new to me
if you can point me to where i can read up on this stuff would help
and any advice will be appercated

[sailr]

You should go to the Australian Model Power Boat Association website:

http://www.ampba.asn.au/

Search for clubs in your area and find someone to guide you. That is absolutely the
best way.

WHERE in Oz are you?

[gav00]

Queensland north of brisbane

i will see what i can find

thanks again