what would be a good hull for the c/c 1515 2200kv motor

[properchopper]

would a df cybrestorm 33 make the motor work a little hard?

Lots of racers run Neu 1515 1Y's in DF 33's or Cyberstorm 32's. Same KV as the CC 1515 2200.

[millzee]

ok, this is what I have on my order, just want to know if I'll be wasting my money or if it'll be a good set up b4 I go ahead and confirm the order, please let me know what you think and if there's anything else I may need. Aeromarine Titan 29 Hull Color: - White - -

Speedmaster Stinger Strut Prop Shaft Size:- Stinger for 3/16" Propeller shafts

Speedmaster 21 Rudder Assembly 5.25" Long Rudder Style: Mono Rudder 2.125" Setback

Speedmaster 1" x 1.5" Adjustable Metal Trim Tabs

One set Metal Turn Fins, medium.

Carbon Fiber Turn Fin Set

Swordfish 200 Amp ESC swordfish:

OSE Large Y Fitting

Aluminum Large Water Outlet

Servo Mounting Standard Size

Traxxas Servo High Torque Waterproof

Du-Bro Futaba J Servo Arms Super Strength

MR200 Marine 2.4GHz 2-Channel Receiver

Du-Bro E/z Connectors 4-40

Great Planes 4-40 Linkage Rod

Du-bro Swivel Ball Link 4-40 w/Hardware

[Gen]

dont like swordfish ,they got a delay after you take finger off full throttle read the threads ,go seaking or castle

[millzee]

dont like swordfish ,they got a delay after you take finger off full throttle read the threads ,go seaking or castle

thanks for the tip, it's just a few hours too late, I placed the order a few hours ago. I had read up a little about the throttle issue but I really didn't look too far into it, I guess I will now though!