there's a new boat in town boys and she's a keeper. with a 4S2P 3300 aMh set up and a prather 225 she's doing 46 mph right out of the box and she is still in one piece after a blow over at that speed. the only thing that i did to the boat is added more epoxy and cloth to the seams, everywhere i could get to. thinned out the mix and just poured the epoxy into the nose and sponsons where i could not reach. the power setup is excellent in my opinion. this is the newest boat from mini cat racing usa. i am one of jim's main r/d guys and this boat is a performer. i have run up to 47mm props and think you can definitely go bigger. i have data logged and temp. checked the esc. and motor and you should have no problem going more in pitch and diameter on the prop for testing. working on trying to get some carbon versions available. now i have been watching the news too about the china issues and toy's, and this boat is from china, but the guy's that make these boat are racers first and business men second. jim and all of us affiliated with mini cat are working with the guy's oversea's trying to get the mini cat line of boats that are alredy great even better. i already have a carbon version of the hydro and that little thing is bulletproof!

Comment