Tweet
Just got it in and it looks great! I might take it out for a float test today. Anything I need to do before I run it for the first time? Just want to make sure everything goes as smoothly as possible. Thanks!
Dan-O
Dan-O
-
Pursuit: T-180, TP 4060/1620kv. Genesis: T-180, GoolRC 2000kv. UL-1: Bone stock. MHZ Tsunami: Full tilt SAW project!
-
Rescue boat, or something to retrieve it if something goes wrong.Hpr 115, Neu 1521 1.5d x2. Delta force Pirate, Insane 45" Neu 2230 -
well the HK ones dont come with an ESC anymore, but when they did guys were blowing them up on the first run!! whats your setup?Comment
-
gut it, glass it, fill it with big motors, batteries, and big esc.Comment
-
Post pictures 1stWe did it with a Bang!
Cats Are Where It's At!Comment
-
My setup is stock motor,2/ 2s 5000mah 30c turnigy batteries in series, turnigy 180a esc, 6mm bullets for motor, additional water pick up and 642 octura prop. Got 40.47 mph on really flat water and low temps..Comment
-
Yea, working on a rescue boat right now. My setup right now is stock prop/motor, 2 Turnigy 3s 4000mah 45-90c batteries, and Turnigy 180 esc. I will try to get some pics up soon but it is nothing special right now.
Dan-OPursuit: T-180, TP 4060/1620kv. Genesis: T-180, GoolRC 2000kv. UL-1: Bone stock. MHZ Tsunami: Full tilt SAW project!Comment
-
Ok, that stock motor is gonna roast fast if your running those batts in series?? i expect you are? Thats a great esc but would be a shame to burn it up over that less than quality motor. Get yourself a metal prop while your at it, m440 is a perfect start IMO.Comment
-
I want to run them in series later on with a better motor but I am going to start out with 3s and the stock motor for now so I can get a feel for the boat.
Dan-OPursuit: T-180, TP 4060/1620kv. Genesis: T-180, GoolRC 2000kv. UL-1: Bone stock. MHZ Tsunami: Full tilt SAW project!Comment
Comment