Best ESC for Leopard 2845, 2950Kv

[b.mcdaniel.2009]

Just bought a Mini sinper from a great member on here. He's already install this new leopard 2845 2950kv motor. Looking for a great esc to run this little guy to it full potential. The mount will also fit 36mm motors to. Have a Castle 1512 1800kv if im not happy. He suggested a 60+ amp esc....Any suggestions?

[forescott]

The Leopard 2845/3y (2960rpm/volt) is rated at 39 amps max. A decent 60-amp esc should be fine.

[b.mcdaniel.2009]

The Leopard 2845/3y (2960rpm/volt) is rated at 39 amps max. A decent 60-amp esc should be fine.

Turnigy or maybe aquacraft???

[forescott]

I was thinking the ul-1 esc. I like the turnigys but never had much luck with the 60-amp versions. Heck, what about a t-120 or swordy just to be safe? The price is good.

[b.mcdaniel.2009]

I was thinking the ul-1 esc. I like the turnigys but never had much luck with the 60-amp versions. Heck, what about a t-120 or swordy just to be safe? The price is good.

Your the 3rd or 4th person who has said the 60amp esc's aint the best....T-120 sounds more like my style "overpowering" LOL. If im not happy with that little leopard i'll throw in a 1512 jsut because.

[forescott]

I bet one of the feigao 380-xl's would work real well in that hull.

[Make-a-Wake]

Your the 3rd or 4th person who has said the 60amp esc's aint the best....T-120 sounds more like my style "overpowering" LOL. If im not happy with that little leopard i'll throw in a 1512 jsut because.

And the T120 is cheaper than the 60a!

[ray schrauwen]

And the T120 is cheaper than the 60a!

Unless you wait until the special one time offer pops up a few minutes after you have been staring at the page. They should give you an offer of $40.

sTILL LIKE THE 120 BETTER.

Back to bed...

[Alexgar]

And the T120 is cheaper than the 60a!

only if your not logged in

[Alexgar]

i have a opto 50 amp an opto 80 amp and a bec 125 if your interested, lmk
link
http://forums.offshoreelectrics.com/...ad.php?t=22352