esc for neu

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jjrctech
    Senior Member
    • Feb 2011
    • 162

    #1

    esc for neu

    Swordfish 240hv ESC or Swordfish 200 amp be good for a neu 1527 1500kv and get its full power??


    the chart to me look like the motor would draw a max of 202amp at 22.2v is this correct?

    thanks
    --> 54" fountain - Bonzi boat. http://www.youtube.com/watch?v=_cxR6yDRJXw
  • Make-a-Wake
    FE Rules!
    • Nov 2009
    • 5557

    #2
    240hv................
    NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=

    Comment

    • jcald2000
      Senior Member
      • May 2008
      • 774

      #3
      Ditto!!!

      Comment

      • Fluid
        Fast and Furious
        • Apr 2007
        • 8011

        #4
        Charts mean little, Neu motors will draw as much as you demand from them with the load you impose - prop, hull, wet-running, etc. That motor will peak well above 200 amps, although an average of 130-160 is probably a good target. IMO always get as much ESC as you can afford. It beats having to buy the ESC twice, or losing running time by having the ESC in the mail.



        .
        ERROR 403 - This is not the page you are looking for

        Comment

        Working...