ESC Programming Terminology ( need clerification )

[LiPo Power]

I have Tactic pistol transmitter and trying to programm my ESC. ( I hate stick programming )
Can someone please explain to me what this means in simpler words:

1. Center Position ---
2. Full up position ---
3. Lowest ( Down ) position ---

Thank You
Robert

[carlcisneros]

center position is the self centering position of the TRIGGER.

Full UP position is full throttle on the trigger. (PULL IT IN JUST LIKE FIRING A PISTOL.)

Lowest position is taking your trigger and pushing it FULL FORWARD.

Thats all there is to it. :-)

Carl

[LiPo Power]

Its not working
I am trying to change from brake to NO brake and have no luck with it, keeps breaking.
I may need to reverse my throttle swich on the transmitter for the time of programming to see if this is the problem I am having.

center position is the self centering position of the TRIGGER.

Full UP position is full throttle on the trigger. (PULL IT IN JUST LIKE FIRING A PISTOL.)

Lowest position is taking your trigger and pushing it FULL FORWARD.

Thats all there is to it. :-)

Carl

[carlcisneros]

I have 2 200A suppo's that I can not remove the brake in the programming also.
These are the newest versions of them.

Carl

[LiPo Power]

Ohh, great news.....
So now what? If I ease up on throttle too much going 45MpH I am loosing my shaft and prop?
That sucks....
Did you try swiching motor rotation? It won't work.....
No wonder this ESC is arround $40.00
...........

[carlcisneros]

There is one more thing you can try.

Power it up for programming, when you get to the section you need, push the trigger ALL THE WAY FORWARD and hold it there.
When you here the sub-section you want THEN squeeze the trigger to full thottle.
It should repeat the section you programmed.
if and when it DOES, move the trigger to the center position and it should give you
the programming FINISHED single long beep.

This is what I did on my 200A unit. Worked for me.

Suppo, go figure<<<<<<<<<<<<<<<<<

[Alexgar]

these are the program inst i have from 2 differant sources http://www.astecmodels.co.uk/suppo-esc.htm

[LiPo Power]

Sorry but why would I wont to repeat the last section?
What would be the point of doing this please?

[carlcisneros]

that is for the older 2s to 4s style of ESC's.

The ones I have got have 6 sections that can be programmed.

LiPo;
It is just one of the automatic sequencing things that Suppo has in the recent programming.


I have got at least 4 or 5 different programming instructiosn for their ESC's. go figure.....................

[LiPo Power]

Well, it looks like the programming sequence is working fine but I can not eliminate, change braking and rotation dirrection.
The rest will see when on the water.... There is no way to verifiy other settings...

that is for the older 2s to 4s style of ESC's.

The ones I have got have 6 sections that can be programmed.

LiPo;
It is just one of the automatic sequencing things that Suppo has in the recent programming.


I have got at least 4 or 5 different programming instructiosn for their ESC's. go figure.....................

[LiPo Power]

Also, some instructions are saying to center the throttle to enter sub options after entering the main menu.
My ESC only enters sub options by full forward push of the trigger....
I am givving up on this piece of.... Back to the tool box and keep it as spare...
or will use the way it is and will get diffrent ESC to run my 1521 1.5D....
Thanks