Thunder tiger vee hull

[Alexgar]

I ran across this does anybody have one they can show more detailed pics of?

http://www.ttamerica.com/boats/ttrb5121.html

[tiqueman]

Looks like just another copy of a Delta Force hull. There are thousands of them out there. Great running boats (hull wise). Im not sure about he electronics. 60A esc ina 42 inch hull seems a bit low. Unless its only doing 15mph or so.

[tiqueman]

Bill34207 has the 41 or 42" DF hull. I think its the DF, it could be a copy. Hes thinking about selling it w/ hardware. Shoot him a PM if your interested.

[Alexgar]

no just wondering about it im waiting on my df29 to get here i bought from encore man, i found the outrunner

http://www.ruberkon.gr/thunder-tiger/boats/spare-parts-outlaw-obl/outrunner-motor-obl-36-15-46a.html?___store=en&___from_store=el#

[sailr]

There's already a thread on the Outlaw. Not too impressive.

http://forums.offshoreelectrics.com/...ghlight=outlaw

[bill34207]

Mine is a 41 clone. With 1527/1.5Y, 240a Swordfish 240HV and 10s runs something like this.

http://www.youtube.com/watch?v=cQP8BDCIqLk

I'm keeping the motor & esc but the hull/hardware could be had easily enough.
There are some pix of it in this thread. Same boat as in vid but with different paint job on the deck.
http://forums.offshoreelectrics.com/...ad.php?t=21392

[Alexgar]

thanks jim

[Flying Scotsman]

4S power and a 60 amp ESC is not going to cut it on a 42" hull, unless you want walking speeds. They state a metal prop but no dimensions.

Douggie

[Alexgar]

douggie in the other post it says its a s220

[Flying Scotsman]

I would run away from this RTR hull, unless you want to toss out all the running gear and start over.

Douggie

[Brushless55]

The ThunderTiger is a 39" hull
comes with a S225 prop
I've seen the nitro version run with a sweet motor and it handled great!
my build
http://forums.offshoreelectrics.com/...ad.php?t=19194