minimum spacing for twin outrunners

[sailr]

Most interesting! Two esc's, right? In twin motor aircraft, you connect the two throttle wires into a y connector and cut the red wires from one of the esc's so the receiver gets power from one battery. If you don't have it this way, could you be getting some sort of feedback?

[carlcisneros]

minimum spacing

Here are a couple of pics of the outrunners installed in my 45" Insane Mono.
notice how close they are together.

also here is a video clip from todays outing at the lake.
Pretty windy there today for sure.
could only run it about 1/2 throttle.

http://www.youtube.com/watch?v=b_oprauXIIk

[sailr]

http://www.2bfly.com/pages/escs/escmain.aspx

scroll down. Options for wiring up two motors/esc's

[Jesse J]

http://www.youtube.com/watch?v=Qyq4xSFAnsM one motor is plugged in, the other is not, this may be a problem, it may not.
(this is not my video)

that is the video I made and linked in post 11 that spurred me to return to this thread.

Jim, yes I think there may be some feedback, but I am glad to see that it is sympathetic. And no I did not remove any red wires - running both BECs. All temps are always under 80F !!