Tweet
Has anyone tried running 3 5 cell packs on a smaller hull such as a 32 inch or smaller hull? Just wondering if it would be too much weight for a boat of that size?
-
-
Do you mean three 5s lipo packs?If so,yes,that would be too much weight.I run two 4s packs in my twin drive 32" and my guess it weighs close to 10lbs. -
Yeh that's what I meant, thinking about building a triple motor setup in a 32 inch hull and wanting to run 5s to each motor but I'm thinking I will need a bigger hull for that.Comment
-
Try the Promise Hobby, 41" Catamaran. It is a knock off of an insane cat.
You can get it in glass, glass & Kevlar bottom or all out Carbon kevlar for a fraction of the Insane version.
Ebay....
I own the 29" Phantom catamaran. I run it on a Turnigy 1400Kv outrunner on 5S2P, a T180 esc and a D/T, thinned x450 prop and it does 50mph+
Just imagine the speed of 3 Turnigy outrunners in the 41" cat of 5S1P each motor, HOMINA HOMINA!!!! Running counter L&R 3 blade 450's MEEYOOWWW!!
Nortavlag Bulc Comment
-
Hmmm that does sound nice Ray, I've never heard of that brand do you know where I could get one of those hulls?Comment
-
EbayComment
-
Yep... Nortavlag Bulc Comment
-
Ben, that Silver cat looks so nice in your avatar. Nortavlag Bulc Comment
-
On a triple motor setup I'm assuming I would run 3 of the same rotation props versus counter rotating right?Comment
-
No, that would be alot of torque in one direction.
I may be wrong but, IMO at least one should be counter rotating. Nortavlag Bulc Comment
-
got your attention thoBen isnt on this thread.
Gas Segad / Gas Rigger / Radtek carbon cat / micro fe rigger / fe ***** in workComment
-
Whoopseeee! LOL.... Just looked at the decal... Nortavlag Bulc Comment
-
Gtg... Nortavlag Bulc Comment
Comment