T180 Killer?

[iamandrew]

http://www.hobbyking.com/hobbyking/s...dProduct=15134

200AMP water cooled....
No BEC....
but $40 ?!?!?!?!?!

[JMSCARD]

its another Suppo HiModel 200.... these have been around with other labels forever... good esc's for the money... just don't run on 7s lol... but they are not, nor ever will be a Turnigy 180 killer... the T180s have a 360 burst rating... these are far less and much smaller Caps and I would bet you would wanna remove the shrink when you get these and make sure the alluminum water cooling block is laying flat on all the fets for good cooling abilities...my bet is no... but still a great deal on a good esc....

[LiPo Power]

Wicked!!!

[JackBlack26]

Thanks for the link. I'm throwing one in on my next order just to try it out.

[carlcisneros]

or just order one from fightercat57.
he is here on the site.

[Alexgar]

fighter sold me one to for about the same price hk is good but i prefer to stick to our own

[ENCORE MAN]

Smoked one of these on second run on a 2000 Leopard, 4s and small prop on a 26 inch mono. I won't be wasting time soldering on connectors on these inexpensive esc's ever again and will go back to the ETTI 150'S. BG

[JMSCARD]

Smoked one of these on second run on a 2000 Leopard, 4s and small prop on a 26 inch mono. I won't be wasting time soldering on connectors on these inexpensive esc's ever again and will go back to the ETTI 150'S. BG

Try a seaking 180 from steve BG if you haven't had one already... They work real well with every motor I've ever tried.... Including my 4074...

[forescott]

Try a seaking 180 from steve BG if you haven't had one already... They work real well with every motor I've ever tried.... Including my 4074...

I used the t-180 in a 40-inch hull with a 5692 on 6s with a 52mm prop. And even used the bec. Not just once but 4 times and it's still working great!!

[Alexgar]

etti 150 are the bomb, with caps unstoppable
on my cc1515 apparition

[Alexgar]

also have a fightercat 200 on my 4s 1515 elam, far from dissapointed

[FighterCat57]

its another Suppo HiModel 200.... these have been around with other labels forever... good esc's for the money... just don't run on 7s lol... but they are not, nor ever will be a Turnigy 180 killer... the T180s have a 360 burst rating... these are far less and much smaller Caps and I would bet you would wanna remove the shrink when you get these and make sure the alluminum water cooling block is laying flat on all the fets for good cooling abilities...my bet is no... but still a great deal on a good esc....

Yep. They work well, but have no way to cool the middle boards. Don't stress them and they'll do OK.

I've tried for months to get them to insert a copper plate to cool the middle boards, but they can't seem to get their act together.

[FighterCat57]

As to the thread topic, it's NOT a 180 killer. It's barely capable of running within it's specs. A good cheap disposable ESC... unless you have a seizure trying to program it with the Tx. he he.

[iamandrew]

Even if it can hold half the amps its rated at it would still be good enoguh for a lot of boat setups.
Ive been considering building up a small retrieval boat and am considering one of the smaller escs

[FighterCat57]

Even if it can hold half the amps its rated at it would still be good enoguh for a lot of boat setups.
Ive been considering building up a small retrieval boat and am considering one of the smaller escs

The 125's are solid in my experience. I have a few of them.