Setup for the NTN-600 mono, help!

[Diesel6401]

Best advise is to get a mono like a hotr in the 26" range with ultra sharp strakes-- 28 45 2700 on 11.1 lipos and a 632 prop and a stringer( adjustable )-- no trim tabs-- 1 turn fin-- 1 running strake on the outer strake and CG at 30%-- Why i inserted this, is to point out that in smaller boats, strakes placed in the wrong place cause more headaches. You Gentlemen who posted above have done the best you can and know what you are doing. I've been that route of revamping just to get it right when i should have been running on the water enjoying it. Enough out of me. Steve has monos here that can fill the bill.

My thought is most of us who have been in this hobby know what a DF26 or DF26 copy (hotr) can do. What we don't know is what this hull can do. I like the effort from the guys who want to try getting this hull to run correctly. If a rookie buys this hull because of the price from HK and comes here asking for help and everyone tells him to dump the hull he might feel a certain way and get out of the hobby, but if someone can give him good advice he might like setting/fixing the boat and gain more interest in the hobby. Just my thoughts, I know you edited your response, but I just wanted to mention my thoughts on the subject.

Happy holidays and happy boating