Yes reggie fountain is my dad! I have a couple of aeromarine gas cats! This is my first electric! Just tryn to get some info and feedback on what i should use!
Thats cool.Stick around here and you will learn quite a bit.There are a lot of very smart and nice people here that are always willing to help.
As far as your
Genesis goes,Id run it on 3s with those motors.4s would be a "hot"set up for drag race type runs.If your wanting 70mph,Id get some higher quality motors such as Leopard 3674.I think this is the site-www.leopardhobby.com.Here is a mild 6s twin set up too-Leopard 4082 1500kv with 180 amp escs from Turnigy or SeaKing.With these motors,I think youll be in the mid fifties and be able to prop up to compensate for kv.70mph is pushing it.60mph is usually the limit for an rc hull.Either way,you should re-inforce the hull as its quite thin.
I already have some 4s 5000mah 50c lipos! Should i be ok running them? Would like to get used to the setup and then upgrade after i get some run time! Any idea what 4s might get me speed wise?
Running twin 6XL on 4s will be fast, that's for sure..
I bet mid 60s or better
I did try my 6XL in my MM on 4s and it snapped the shaft within 10sec!
But it was sure fast for those 10sec...
.NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s
I think im gonna try the 4s and see what happens! I havent got it yet, look forward to running it! Another question i dont have the boat so i dont know what room im gonna have but i have one castle 1717, how would it run with a pair of them?
Comment