Cogging question for 1717 owners.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Make-a-Wake
    FE Rules!
    • Nov 2009
    • 5557

    #1

    Cogging question for 1717 owners.

    Hey guys, never really noticed before, but i spun my motor shaft by hand with the collet on, and its odd..........one big cog, one small, one big, one small.....etc..................is this normal? Thanks
    NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=
  • nobbiworld
    Senior Member
    • Mar 2009
    • 169

    #2
    Have 4 of these and all are even.

    Comment

    • Make-a-Wake
      FE Rules!
      • Nov 2009
      • 5557

      #3
      Well crap............i went ahead and took off the front cap and pulled the rotor. No magnet issues from what i see and nothing odd looking inside. I also gave it a bench run, ran fine........hmmmmm? Thanks nobbi
      NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=

      Comment

      Working...