Awesome building/repairing stuff !

[properchopper]

After years of building/crashing/repairing hulls & trying all kinds of stuff to build or mend hulls, especially those embarrasing gelcoat crunches , I finally found the best and easiest to use product (in my opinion): Evercoat Formula 27. Mixes with the enclosed hardener, ( work it like Bondo), sets immediately, sandable in 20 minutes, gets real smooth after sanding. Makes really nice fillets. $19.45 at West Marine for a lifetime supply. Yay !!!

[befu]

So, how does this compare to Bondo? Is it similar? Easier to form or easier to sand?

Looks like a good find

[properchopper]

So, how does this compare to Bondo? Is it similar? Easier to form or easier to sand?

Looks like a good find

Mixes with hardner just like Bondo, starts out like creamy peanut butter, sets in @ 2-3 minutes, sands very easy & comes out less porous than Bondo, fairly shiny. For fillets I mask off the surrounding area & peel tape off as it sets. Apparantly its primary use is to fix/patch fiberglass boat hulls. Really like this stuff.

[Flying Scotsman]

Tony, how well does it work as a dick stiffener, as I am in need of assistance...tried the magic drugs and I did not dance my way down to the local whore house.

Douggie

[properchopper]

Tony, how well does it work as a dick stiffener, as I am in need of assistance...tried the magic drugs and I did not dance my way down to the local whore house.

Douggie

Make sure it cures completely before "use" or keep a bucket of cold water handy

[DPeterson]

Tony
Make sure you bring a gallon of this stuff with you to Arizona.

Doug

[properchopper]

Tony
Make sure you bring a gallon of this stuff with you to Arizona.

Doug

Hell, I hope it comes in 55 gallon drums

[sailr]

Back to a serious note:

BEST boat building adhesives anywhere! This stuff is incredible. The Model Matrix stuff is the best way to install a stuffing tube that I have ever seen! The epoxies have incredible strength.

https://www.modeladhesives.com

http://www.modeladhesives.com/files/installing_a_flex_drive_in_a_boat.pdf

[kjohnsiii]

Looks like a great product!

[properchopper]

Back to a serious note:


It was a private joke, Jim




BEST boat building adhesives anywhere! This stuff is incredible. The Model Matrix stuff is the best way to install a stuffing tube that I have ever seen! The epoxies have incredible strength.

.modeladhesives.com[/url]

http://www.modeladhesives.com/files/..._in_a_boat.pdf

But on a serious note, the products in your link look like nice stuff.

[sailr]

No problem Tony! I knew it was. My comment was intended as humor as well.

But on a serious note, the products in your link look like nice stuff.

[geodehunter]

O'boy, Now I don't know which one to order.

[Insaniac]

Back to a serious note:

BEST boat building adhesives anywhere! This stuff is incredible. The Model Matrix stuff is the best way to install a stuffing tube that I have ever seen! The epoxies have incredible strength.

https://www.modeladhesives.com

http://www.modeladhesives.com/files/..._in_a_boat.pdf

It better be good; costs $33 bucks for 8 oz. shipped to CA! That's INSANE!

[sailr]

That's 8 oz. by volume, not weight as most epoxies are sold. It will last you a LONG time. The quality is well worth it. We spend a ton of money on our boats but balk at the funniest things.

[Insaniac]

That's 8 oz. by volume, not weight as most epoxies are sold. It will last you a LONG time. The quality is well worth it. We spend a ton of money on our boats but balk at the funniest things.

OK you convinced me...I'll order some!