Pursuit mono

[Brushless01]

What shaft does it have stock ?? .150 ??

[Brushless01]

This is the same boat just with a different motor set uphttp://www.astecmodels.co.uk/catalog/product_info.php?cPath=97&products_id=752

[dtacmed]

Very Interesting. This is the same Hull and Hardware that Fuller's Fast Electric's Sells. I bought one from Him. Motor and ESC that came with the boat was the SV-27 Motor and Unknown ESC. Both of which burned up after only 2 runs. Replaced with ETTI 150 Opto and Feigao 13XL Reinforced all the mounts and has made a very good Boat.

[teddyboy]

Pursuit

I bought my Pursuit from Jan at Kintec. And Jan was extremely helpful in the set up of the boat. Mine has a stinger not a strut. The upgrades performed by me were installation of a motor thrust bearing, removal of the square drive shaft aupgraded one piece Kintec driveshaft. I had to replace the collet on the motor with an Octura model. I installed a separate water pickup to cool the ESC and the rudder pickup to cool the motor. I mounted the 2S batteries on each side of the motor and spent some time reworking the motor mount to ensure that it was aligned with the stuffing tube and drive shaft. The ESC was mounted forward of the motor.

The boat runs and handles great. It did take some minor work, but well worth the effort.

Ted

[Bigbore]

Pursuit in rough water

How this boat run in rough water? Is there a video to watch?

[Diesel6401]

How this boat run in rough water? Is there a video to watch?

Kintec

http://www.youtube.com/watch?v=_QA2FJYybyA

[dtacmed]

Here is my latest running it behind my Deck Boat. Handles rough water great. Kinda bad quality was late in the evening and my wife was driving and filming at the same time.

http://www.youtube.com/watch?v=Zlde8TSzI4Q

[Bigbore]

Here is my latest running it behind my Deck Boat. Handles rough water great. Kinda bad quality was late in the evening and my wife was driving and filming at the same time.

http://www.youtube.com/watch?v=Zlde8TSzI4Q

Wow ... what a beatiful action video!!!!
Anybody made the pursuit self straightening? Do you think is possible to make a flood chamber on the left side?

[teddyboy]

Pursuit

I don't believe that there is room for the 2s batteries on each side and the self righting chamber.

[dtacmed]

Here is another video of mine running. Feigao 13xl, x445 prop, etti 150 opto with cap bank, (2) Protek 4200 45C in series. (6S1P) Running between 40 and 45. Adjusted kinda wet but handles like a dream. Also thanks to Steve and OSE for the set-up recommendations.

http://www.youtube.com/watch?v=Z7nAYgB-t8w