6mm Contacts Wishlist...

[Darin Jordan]

In case anyone is listening who MIGHT be a supplier of such things... I wish that there were some 6mm or ??? contacts that were of THIS design:



The 6mm and 5.5mm we currently have are of this design:



These lose tension regularly and have to be opened back up (the male side... )... and often don't hold as well as the spring type contacts...

I've seen the 6mms in the spring type on a Shultz 40-160 ESC that had been done up by Shultz for a buddy of mine for his 1/8th scale... so I know they exist... Not sure of the electrical specs of them, but I'm assuming they are pretty good...

So, IF someone happens to be looking for another product to supply... this might be a welcomed one...

In these days of batteries outlasting the contacts... I think they'd be good sellers as well...

[Darin Jordan]

Hmmmm... These are the ones:



They are listed directly from Schulze...

[FE_Chris]

i just ordered some 6mm bullitts from UH.com/ I'll see what they look like when I get the package.

[robby76]

while on the subject of 6mm, this would fit the KB45 motors. would also need 6mm thrust washer.

[Steven Vaccaro]

while on the subject of 6mm, this would fit the KB45 motors. would also need 6mm thrust washer.

Beautiful coupler, but they are about $28 US dollars plus shipping.

[FE_Chris]

Wow thats a lot of money for a coupler. Octura has always worked well for me, and my wallet!

Beautiful coupler, but they are about $28 US dollars plus shipping.

[FE_Chris]

Wow thats a lot of money for a coupler!!!!!

Beautiful coupler, but they are about $28 US dollars plus shipping.