Tweet
I am going to run two schulze 40-160 fut V16's watercooled speedys in a 54" mhz drambeui in ice cat with twin 2215 1.5y's (just bought the last esc I needed from tth 
).... I have a ton of lipos but because of my battery trays, etc., want to run 1p per motor and esc....
So my layout was going to be 8s1p Turnigy 5000mah 40c lipos to each schulze and 2215... then with a y adapter going to each speedo and then into the one reciever.....
I am going to start off running De-tongued,Back cut,Cupped to 3.6, and Mirror polished Counter Rotating X447's by Andy Brown...
So my question again is this setup ok for 3 minute runs.... or should I definately go 8s2p 10000mah as I do have the lipos on hand to do so..... and if any of you would like to estimate the speed for me I might expect with this setup that would be nice to hear what she might be capable of on 8s..... I know the props are on the conservative side but I am not racing or setting up for saw runs... I just want a nice reliable "Big" boat to run at our family compound on the "Big" lake...
cl # 7 = MY
).... I have a ton of lipos but because of my battery trays, etc., want to run 1p per motor and esc.... So my layout was going to be 8s1p Turnigy 5000mah 40c lipos to each schulze and 2215... then with a y adapter going to each speedo and then into the one reciever.....
I am going to start off running De-tongued,Back cut,Cupped to 3.6, and Mirror polished Counter Rotating X447's by Andy Brown...
So my question again is this setup ok for 3 minute runs.... or should I definately go 8s2p 10000mah as I do have the lipos on hand to do so..... and if any of you would like to estimate the speed for me I might expect with this setup that would be nice to hear what she might be capable of on 8s..... I know the props are on the conservative side but I am not racing or setting up for saw runs... I just want a nice reliable "Big" boat to run at our family compound on the "Big" lake...
cl # 7 = MY