LiPo lead failure

[Insaniac]

This was a cold solder joint that came apart on a Flighmax 5000mAh 4S pack. I can see the pad on the circuit board inside. Can this be re-soldered? Do you need a "special high temp"solder?

[vasy]

had this, I just used regular electric solder and it worked well.
Just need to have good soldering iron.

[Gary]

I have done the same with no problem. Just use caution........you dont need any mishaps with your face that close while working on it.

[Insaniac]

Thanks, I'll give it a go...

[BHChieftain]

This just happened to a friend of mine today on a 4s 5000mah pack. I think it was the same brand.

Chief

[Insaniac]

Soldered it back together and it works fine...thanks!