Hydra 240 Lv setup

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • nova68
    Senior Member
    • Jul 2008
    • 151

    #1

    Hydra 240 Lv setup

    What is the best way to set up battery connectors I am running a 4S2P set up do I split the + and - or leave them together ?
  • LiPo Power
    DJI Drone Advanced Pilot
    • May 2009
    • 3186

    #2
    I was running CC240 on my DF-33 with 1 set black and red to Lipo # 1 and second set to Lipo # 2 for long time and it did work great for me. Some members here on OSE doing this ( picture ):
    Both are good ways to connect to your ESC
    Robert
    Attached Files
    DJI Drone Advanced Pilot
    Canada

    Comment

    • Doug Smock
      Moderator
      • Apr 2007
      • 5272

      #3
      Please see post #10 here if you are going to run packs in parallel.
      http://forums.offshoreelectrics.com/...ring+hydra+240
      If you are going to run a single pack the blacks need to stay connected as do the reds as per Castle's instructions.

      Enjoy your new control.
      Doug
      MODEL BOAT RACER
      IMPBA President
      District 13 Director 2011- present
      IMPBA National Records Director 2009-2019
      IMPBA 19887L CD
      NAMBA 1169

      Comment

      • Shooter
        Team Mojo
        • Jun 2009
        • 2558

        #4
        Connect the blacks together and connect the reds together per the instructions. Here's a photo of mine...
        Attached Files

        Comment

        • kevakov
          Senior Member
          • Nov 2008
          • 111

          #5
          I second the way Shooter does them, that is exactly the way my 240 is

          Comment

          • Shooter
            Team Mojo
            • Jun 2009
            • 2558

            #6
            No need to cut the wires. Just carefully strip the insulation off, tin with solder, and then solder together.

            Comment

            • nova68
              Senior Member
              • Jul 2008
              • 151

              #7
              Thanks for all the help and all the good pictures to, now I know what I have to do.

              Comment

              Working...