Need to find an SV27 rudder water nipple

[Karfrik]

the one that screws on top of the rudder and where you attach the silicone tubing going inside for watercooling.LMK where to get it,......Thanks,Al

[ON THE FARM]

i think it is a 4mm thread so just about any nipple from a r/c truck fuel tank will work.
i know all of te nipples on a traxxas fuel tank are 4mm, so try one of them.

[blizard05]

the one that screws on top of the rudder and where you attach the silicone tubing going inside for watercooling.LMK where to get it,......Thanks,Al

PM your addy, and I wil send one to you. Larry

[Karfrik]

sorry for the delay!!! PM`ing you!!!,..thanks,Al

[blizard05]

sorry for the delay!!! PM`ing you!!!,..thanks,Al

Wil send it out on Monday.($75.00 S+H) LOL Glad I could help Larry

[Karfrik]

Thanks much!!!!,...Al

[Karfrik]

Hi Larry got it today,but unfortunately its too big."On the farm" was right it uses a 4mm one,the one you sent came at around 4.7 or 4.9mm.Thanks much anyways and check your PM`s......Albert

[blizard05]

Hi Larry got it today,but unfortunately its too big."On the farm" was right it uses a 4mm one,the one you sent came at around 4.7 or 4.9mm.Thanks much anyways and check your PM`s......Albert

Thats strange, it came out of a sv27 rudder Larry

[Alexgar]

i broke mine in a pb fasttech and drilled and put k&s tube with silicone

[blizard05]

Al, I have a smaller one, I can send your way I got the rudder 2hand,maby it was drilled out that could be why the one I sent was too big. LMK if you want the smaller one ( I wil send the smaler one to you today ) Larry

[Karfrik]

Sure Larry I`ll take it!!!.Just read you were sending it already,so many thanks again.Bigger one is going out tomorrow your way...............Albert

[Karfrik]

Got the 2nd one and its already fitted in the rudder!!!!.....Thanks a lot for your time and effort!!!...........Albert

[blizard05]

Got the 2nd one and its already fitted in the rudder!!!!.....Thanks a lot for your time and effort!!!...........Albert

NO problem, glad to help Larry