Breaking Flex cable

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • scotthend21
    Junior Member
    • Jan 2008
    • 23

    #16
    Any suggetions on a set up. Finally got this going the speed I like. Really don't want to give up the speed. Maybe different motor prop set-up. this is a 32" apparition from head of river. I have ahd this set-up for a couple of years running on the A123 batteries. I would like to keep the 4S lipos since I bought 6 of these and really don't want to throw any more money into batteries. don't mind changing motors and props. I think I have already got my monies worth out of the motors according to all of the replies.
    I would like to thank everyone for their input.

    Comment

    • forescott
      Hopelessly Addicted to RC
      • Nov 2009
      • 2686

      #17
      You could probably drop down to an 11L and see the same speed. I guarantee those motors are struggling to turn their max rpm, and are coming no where near that. A lower kv motor will have much more torque and be able to reach closer to its max rpm, pull less amps, and run cooler.

      Comment

      • Jeepers
        Fast Electric Addict!
        • May 2007
        • 1973

        #18
        I would use 2 9XL motors for a cheap set up or 2 Neu or Neu Castle 1515 1y motors all on 4s lipo. since your running twins.

        Comment

        Working...