Toysport mono w/ flood chamber

[DON SHUHART]

I have a TOYSPORT MONO WITH FLOOD CHAMBER ,LEHNER 2250 12 T, 8S1P, HACKER 77, WITH TRANSMISSION. RUNS GOOD BUT WILL NOT RIGHT IT`S SELF.

IF I CHANGE TO A NUE 1527 1Y AND A SCHULTZ 40/160 WITH DIRECT DRIVE WILL IT WORK ? WILL HAVE A LOWER CENTER OF GRAVITY. DON

[Steven Vaccaro]

Have you tried adding some lead weight to the flood chamber side? You shouldnt need much. Also I open up the holes in the front and back to allow the water to enter quicker.

[electric]

Steven is right. Take a look at my Triton build I just completed in the build section. That one rolls with no weights. If you cannot get the batteries in a good spot, just velcro weight to the flood chamber side. It does nothing bad to the handling and really ensures the boat rolls properly.

On a previous one, I just took a pack of finishing nails for a nail gun, wrapped them in black electrical tape, and then velcro'd it to the wall. It worked great.

[BHChieftain]

Hi,
Here's a link to my syncron build thread and I have some pics of the battery config I use. It flips no problem.


http://forums.offshoreelectrics.com/...ad.php?t=13793

Chief