CT03 and CT04 hulls where to buy??

[Tommy Gun]

iv been doing some more research and dont think that the 60" super cat is the best way to go for me but iv been looking at these CT03's and CT04's but only in videos does anyone know where you can buy these? and what the new MHZ website is i cant find MHZ boats or parts anywhere? and does anyone have any idea what it cost to have bonzi build a boat? i was informed that bonzi will build any boat for you but mine will be FE so id just like all the hardware mounted and i can do the rest..

thanks
blake

[ED66677]

Hans Peter make them http://www.hpr-powerboats.ch/

[Gerwin Brommer]

Not sure if Hanspeter can make the 03 anymore.
MHZ has the molds for the 03.
Btw : 03 for FE, 04 for I.C motors.

03 : http://www.mhz-powerboats.com/shop/artikel1707.htm

[ED66677]

you're right Gerwin HansPeter doesn't make the 03 anymore!

[Tommy Gun]

Thanks that's what I was afraid of bc the hulls looked real similar to the hrp233 but I wa hoping it was a cheaper version but obviously not lol thanks for the input guys!! I just got off the phone with bonzi sports, they are in the process of making a 60" cat that should be out in a month or 2 I may be looking into one of them, bc bonzi will be building my boat regaurdless of what hull I go with, they are going to set all the hardware and drive cables and all then let me do the motors esc and electronics thanks agn for the replys

[tiqueman]

I waited 2 years for a "will be done in 2 or 3 weeks" Skater cat from the Bonzi Boys. I got impatient and forked out the dough for a HPR CT04. Best decision I ever made.

[tiqueman]

Tommy you have a PM

[Boatman]

Not sure if Hanspeter can make the 03 anymore.
MHZ has the molds for the 03.
Btw : 03 for FE, 04 for I.C motors.

03 : http://www.mhz-powerboats.com/shop/artikel1707.htm

Why Gerwin? Why 04 for IC and 03 for FE

[Xcesive8]

Hanspeter made the CT04 with higher side walls to compensate for running Gas motors.

03' its a tight fit!

[Tommy Gun]

Just to clear things up the bonzi sports isn't building me a complete boat I'm just either sending them a hull or purchasing thier new skater cat 60" and they will be building it with their hardware with 1/4" drive and all hardware installed all I will have to do is install motors, esc's, and servos

thanks for all the info though!!

[Tommy Gun]

And what about any used HPR hulls? Any one ever sell them with hardware only?

[westbeach]

There is one on RCU for sale, which I believe might have been listed here on OSE as well. Have a search, the seller is CAT-BOI (Sandy is his name) or just lookup RCU.

And what about any used HPR hulls? Any one ever sell them with hardware only?