New HK Deep Vee's?

[vasy]

I've bit the bullet and ordered the large one.
Will report back when I receive it.

[jamespl]

Nice one, keep us posted. I will let you guys know what the NTN600 is like. I think the only thing I would change is the esc to a seaking 60a and run 4s lipo

[ray schrauwen]

The bigger one looks like this hull;
http://cgi.ebay.co.uk/41-fibreglass-...item439d637420

Same hull...

[ray schrauwen]

We don't really know if that lenght is hull length or overall either. Could be a 33" boat. I'd guess that the motor in it, being that size will be plenty. The quality is up in the air though. Could be coming from the same place as the Castle motors.

Its a 41" boat, HOR sells them for $112 + 80 shipping.

[ray schrauwen]

I've bit the bullet and ordered the large one.
Will report back when I receive it.

Should be a fun boat man! Let us know if it comes with a metal prop. My gues it does and its 44mm.

[supafastsupra2]

Assuming the CC/Neu clone is underpowered, what would be a good budget 6s setup for a hull this size? (Could use a CC/Neu motor but would prefer to keep it on the cheap size, outrunner perhaps?)

[Alfa Spirit]

Those boats are very nice, they are made by TFL Hobby. I' m not agree with motors and ESCs, but they are nice, I like this 675mm Powerboat

[supafastsupra2]

Found the motor, I think. Now to find feedback on it..

http://toyabipro.com/product_188.html

[Rumdog]

Good find! These may end up being some goodies!

[supafastsupra2]

Hmm another interesting motor.. 56mm OD, that lies somewhere b/t 1900 ans 2200 Neu series.

http://www.leopardhobby.com/product/product_veiws.asp?id=1256&functionID=01020202

[Rumdog]

WOW. you should post up a new thread!

[ray schrauwen]

Those look like they could be the new 4pole Feigao's ??? NICE find!!!!

Maybe the new Scorp inrunner clones before Scorp. released them. Jeese, every time I turn around.....

New thread needed!

[ray schrauwen]

Those boats are very nice, they are made by TFL Hobby. I' m not agree with motors and ESCs, but they are nice, I like this 675mm Powerboat

Make a nice scale N2 offshore boat with those steps!!

[Alfa Spirit]

The NTN600 Kiton is lovely, It' s necessary to set the COG on the rear of the hull 1/4 of lenght

[Jesse J]

steps? two? any interior pics - nice looker. is that metal flake gunmetal paint/gel coat?