Conformal Coating

[egneg]

This is the stuff I have been using to water proof the electronics. You can use a black light for inspection. Sorry for the quality of the photo as my camera does not take good photos under these conditions. This is a FM RX after the coating. The 2.4 RX's don't have as many things for the coating to deal with.

[andym]

Yep the gear I use is the same, makes it easy to see that it is done properly

[Alexgar]

what product is that

[andym]

I am using Electrolube HPA Conformal coating HPA200H

[Alexgar]

in a spray can thats too cool. ive been using epoxy with a brush, no wonder i dread it

[Alexgar]

have even used hot glue on rx

[Heath M]

Where you getting it from Andy?

[egneg]

http://www.ellsworth.com/display/productdetail.html?productid=1810&Tab=Products

This is the stuff I have but I got it from McMaster-Carr.

[andym]

I got my local electrical shop to stock it, my first can I bought online can not remember where. Do a search on it. Can get you a can if you want heath?

[andym]

Heath try here http://www.mektronics.com.au/index.p...id=7&Itemid=57

[Jeff Wohlt]

You can get it here in the US

http://www.midwesttech.com/marketplace/product/E11-HPA200H.asp

Going to order me some as well. I like the blacklight check feature. Easy to solder thru as well.

[Heath M]

Heath try here http://www.mektronics.com.au/index.p...id=7&Itemid=57

Spankyou hairy crutch Andy

[egneg]

Thia is similar to the unit I have for checking coverage.

http://www.arcatapet.com/item.cfm?cat=15594

[old guy]

So you can use this on 2.4 RX and ESC
OLD GUY

[FighterCat57]

I've had good luck with pure silicone for receiver sealing, but this looks way cool and much neater. Having the black light inspection is neat! I can see it being very useful and eliminating guesswork on sealing.
________
Buy Silver Surfer