Anyone run a fuller mono?

[FE_Chris]

Hey guys. I was looking at mono's because I have found a FE Club in my area! Yay! They run P-Mono I think.. Im still looking into it. The boats are around 30" in length, and they run 700 motors, 12 cells I believe.

Anyway, I was looking at the Fuller FE Mono's. For 369$ he's got a nice pre-built 29.5" hull and HW combo. Gel coated and everything...

Anyone run them?

I was looking at BBY....But, the FFE boats are fibreglass, and gel coated. I would have to paint the BBY boat, and the fuller hardware looks to be of better quality.

http://www.drcwebservices.com/ffe/builtboats.htm

[Eyekandyboats]

that would be P spec. you can run a mono or cat its a offshore course.

[hkusp45]

I have a Dark Horse 33" from fuller and Just ran 54 mph on GPS. They are good hulls that need little set up. I still have a little set to do on mine but Im getting there..

[FE_Chris]

That sounds right. P. But I did not see anyone running a cat. I like cats better myself and would rather run a cat. Hmmmmm....

that would be P spec. you can run a mono or cat its a offshore course.

[Jeepers]

One of the guys(H20camel) in the club runs an oval masters 29 from BBY its a nice boat fast and good handling, I run the older Fullers darkhorse30" its fast and handles well, and Flyguy55 runs a Delta Force hull, I like all three boats but I would give the nod to the Delta Force, its a well layed up hull, very nice.

[FE_Chris]

Yeah I like randy's boats, but man I hate ABS. What can I say. it looks like for the money Fuller's offers a better deal.

The Fullers 29.5" hull looks a lot like a Titan29 don't you guys think?

[Rex R]

I gather that, there are a fair number of folks running the 25.5" and or the 33"(delta force hulls, n2 & p mono). nice hulls...but there are some quibbles; the hatch is a tight fit(use a bit of hatch tape to pull the hatch) and the windscreen is not well marked(makes it hard to do a nice paint job :)).

[FE_Chris]

Thanks Rex. I appreciate the info.

[properchopper]

re :

I've got a Dark Horse 33"coming this week. Will rig for P-mono with Neu motor. Word is that it's the hot setup; we'll see.

[Darin Jordan]

I've got a Dark Horse 33"coming this week. Will rig for P-mono with Neu motor. Word is that it's the hot setup; we'll see.

Do you mean "Delta Force 33"??? The Dark Horse (30") was a completely different hull...

The Delta Force IS a VERY host P-Mono setup... You'll be pleased if this is the one you have coming...

[properchopper]

Do you mean "Delta Force 33"??? The Dark Horse (30") was a completely different hull...

The Delta Force IS a VERY host P-Mono setup... You'll be pleased if this is the one you have coming...

Whoops ! My Bad ! This is Jocko's 33" boat that he credits you with setup help ! Sorry for my dyslexic dain bramage ; I stand corrected !

BTW, I'll be racing with Randy this weekend & may pick up one of his Neu motors ; which one would you recommend for the 33" if you don't mind me asking ?

[raptor347]

I'm running a 1521/1.5D in mine. It is an absolute animal, and very adaptable. I ran the same motor in both P mono and OS with just a prop change.

If you go with the 1521, you'll want the 8mm shaft and a .187 cable.

[Darin Jordan]

I'm running a 1521/1.5D in mine. It is an absolute animal, and very adaptable. I ran the same motor in both P mono and OS with just a prop change.

If you go with the 1521, you'll want the 8mm shaft and a .187 cable.

That's the setup I'd run... though I didn't know that the 1521 came with an 8mm shaft! WOW!

One that can also work is the 1515 1Y, which is still really fast from what I've seen... but I don't have any details on applicable props for that, etc...

For the cost of the motors, you might as well just get the 1521 1.5D and be done with it! It really IS a beast!

[mike a.]

wat club are you joining, do they have a website?


thanks

[FE_Chris]

I wish I could find the website mike, but I can't. I do see steven sells the same hulls here on OSE. But he does not have an option to order one with the hardware installed....and he does'nt carry the fuller hardware......


Hmmmmmmmmmmmmm