Data on MHZ no-step

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • electric
    Fast Electric Addict!
    • May 2008
    • 1744

    #1

    Data on MHZ no-step

    Thought I would share some data on a boat I was running today. (Since I just recently got an Eagle Tree data logger) This is on a MHZ no-step 23" long boat. I am running a 10xl motor, x337 prop(3blade),4s, and an old SV esc I have. The boat was really running nice until I was heading into the wind and it took off like a plane and then crashed on the bank. The hull is still fine, but I bent the rudder and some other hardware that will need work.

    The bottom line is speed, the top line is amps. The interesting data was it was peaking around 41.5mph and was pulling upwards of 65amps on its way there. The last amp peak is from the wreck so it does not count. I have often wondered about the SV esc's, they seem a lot tougher than advertised.
    Attached Files
    Last edited by electric; 05-10-2010, 09:37 PM.
Working...