Delta Force 29 Build

[dddmx3]

Its a little early to start this, but im doing it anyway. My deltaforce 29 is getting painted right now (silver) so I cant do anything to it!
So far Im thinking...

Feigao 9XL,
http://www.offshoreelectrics.com/pro...-540XL&cat=116
ETTI 150,

http://offshoreelectrics.com/proddetail.php?prod=etti-esc-race-150-opto

Carbon Mount,
http://www.offshoreelectrics.com/pro...prod=ose-80210
4s lipo (in series)

http://www.hobbypartz.com/83p-5000mah-2s1p-74-25c-car.html

.10s Servo

http://www.hobbypartz.com/servo-mg90s.html

What do you guys think?

[bigwaveohs]

My son and I are going to build a DF 29. Do you have any information about motor placement and CG location?

[dddmx3]

Batts near the back motor little further than the center

[bigwaveohs]

Motor mount xx-inches from inside transom? CG at XX-inches from transom? That kind of thing...

[ED66677]

I have the copy of the 29"DF with 8XL and 2x2S 4900mAh Rhino's from HC, I use a cheap 100A ESC from e bay, a 9XL would let you use a slightly bigger prop but the 8XL works fine on this hull, put the motor as far back as you can (check my web page for some pix of it), ESC in front of it and batt on each side, no turn fin, no trim tabs, start with 42 mm prop and go up one size may be but not more!

[dddmx3]

Thanks ed6667
I'll go with 9xl.

Don't have my hull so I can't help u with the measurements :0

[ED66677]

good choice, if you check on youtube a guy Jasoncourt11 has one, with a 9XL dead fast http://www.youtube.com/watch?v=REveAn7JdNQ

[dddmx3]

Nice! I like it!

[dddmx3]

Still have not got my boat back from painting. Uh oh!