Tunnel Hull setup

[F1 boats]

Hi info need

I have a 36 in Fibreglass tunnel hull that weight is 1.44kg bare hull

was going to run it on 4s plenty of room to run 4s2p

had in mind to use a neu motor 1515 or 1518

should i run an outboard setup like the 3.5 bullet or should i run a strut and rudder

Thanks

[Heath M]

Hey Peter thats a big boat m8, you'd be better off with the 1518 1800kv castle/neu and a big prop

Heath

[properchopper]

If you run a motor like the 1515 or 1518 with a Bullet drive or any other lower unit with a .150 cable you'll break cables immediately. A 7.5 lower with a .187 cable is what you'll need.