Hmm
My amp goes to 11.. the police join me after 6 ....
I ran a few the 3300 45/90 from HC.. prewarmed and not abused first few cycles they performed great.
I set their lvc at 3.5 !.
This was in a mild setup mono.
Hotter setups may drop V lower than LVC on load.. inappropriate for lvc to activate on startoff when pack is ok.
If this occurs, add some buffer caps between batt and esc.
Put ET between batt and caps !
regs
W
My amp goes to 11.. the police join me after 6 ....
I ran a few the 3300 45/90 from HC.. prewarmed and not abused first few cycles they performed great.
I set their lvc at 3.5 !.
This was in a mild setup mono.
Hotter setups may drop V lower than LVC on load.. inappropriate for lvc to activate on startoff when pack is ok.
If this occurs, add some buffer caps between batt and esc.
Put ET between batt and caps !
regs
W
Comment