mm esc

[Alexgar]

I have a mamba monster esc coming from castle and its oviously not wp, whats a good trade in a boat esc for a new mm esc. trades welcome, but i have a turnigy 180 and its quite big for the 21 inch vee hull i want to install in. Any opinions greatly appriceated

[Alexgar]

needs to be 6s so if all else fails i can use it for something else

[Alexgar]

sorry to not specify its a mamba monster esc, i own both and just thought about it

[Jeepers]

why not just water proof it and use it, it is easy to do.

[Alexgar]

its fan cooled and in a small encloser not possible

[Make-a-Wake]

Wht not just buy this 120a watercooled 6s ESC for $60..............keep your MM or sell it on ebay. I'm assuming you wont be running a motor pulling 120a in a 21" boat

http://www.hobbycity.com/hobbyking/store/uh_viewItem.asp?idProduct=10626&Product_Name=Turnigy_AquaStar_120A_Water_Cooled_ESC

[Jeepers]

sounds to me like he is running 6s in it which is OVERKILL

[steveo]

yeah you should buy the 120 amp esc and sell me your 180- i have a 90 amp seaking if you are interested

[Alexgar]

the 2 3s 2200mah i had from my rc cars. they fit perfect and the boat is well balanced and heavy enough to get great speed. 1500kv puts me at about 33000 rpms, sounds perfect to me

[Make-a-Wake]

What size is the motor................that should really move.....!

[Alexgar]

use a stock bj motor or a 8xl

[Alexgar]

a video until my set screw at drive dog let up

http://www.youtube.com/watch?v=2kN_3gwy2jo

[Make-a-Wake]

Too bad you didnt get a full throttle run in on the vid..............that would have been fun to watch................That is gonna be a hotrod. Whats wrong with just running the 80a esc setup like in the vid............?

[Alexgar]

i burnt that one up in another boat and i cant use the mamba monster so i want to get a fair trade for a new speed control that will collect dust