question about eagletree logger

[ezhitz]

Was just wondering out testing my boat today and tried my new eagletree
logger when the boat can back my temps where all under 110F but the logger felt
real warm is that normal?

[Flying Scotsman]

What set up, boat etc.
Are you using bullet connectors...what length of wire to connect. What was the temperature of the logger..What amp draw did the logger record?

Douggie

[ezhitz]

its in a rigger running a 7s ,2s 5000mah lipo esc wire length is 7"
and 2" on the logger with 5.5 bullet connecters. It's the eagle tree
150 amp V3, temp was about 98-100f.The log showed max amps was
129.28. Hope that helps.

[Flying Scotsman]

Riggers I do not run but your temperatures are fine, why were you concerned with that temperature(100f) on the logger. The amp rating if it was a spike is also fine, dependant on your ESC.

Douggie

[ezhitz]

Thanks Douggie I didn't think it would heat up but looking at it now
it has power going though to make sense.