c/g for a lap cat

[mpg43]

would anyone know what the c/g should be on a 27" lap cat tunnel? Any help would be appreciated.

Thanks,
Mark

[Darin Jordan]

would anyone know what the c/g should be on a 27" lap cat tunnel? Any help would be appreciated.

Thanks,
Mark

Just as a general rule of thumb, almost EVERY boat starts at around 30% of the length... then you adjust from there... Most work somewhere in the 28% to 33% range.

I would start at 30% and work from there... likely you'll find that this is VERY close.

[mpg43]

OK , Thanks Darin. I will try starting there.

Mark