Still Sources for GOOD NiMH matched cells??

[Darin Jordan]

Are there still any sources out there for race quality matched NiMH Sub-C cells? Seem to be fading into "old tech" land...

[properchopper]

I've had these for a while & I'll let them go very reasonably if you need them. Offer ?

[Steven Vaccaro]

Are there still any sources out there for race quality matched NiMH Sub-C cells? Seem to be fading into "old tech" land...

Try steve hill, he stilll has nimh for his robot customers.

[CornelP]

Try here:

http://www.kyosho.de/?page=shop/product&category_id=35e9f6ed0a6b18eb6b7351fa5eb7a5f9&ps_session=h74oql9jf4h6kcgef9e2i141j3&mod_title=product&setlang=deu#

I just got some 15 pieces of the 5300 and they are lovely... just charging them as we speak.

[Doby]

Darin; I have to ask,,,,,Why????

[Steven Vaccaro]

Try here:

http://www.kyosho.de/?page=shop/product&category_id=35e9f6ed0a6b18eb6b7351fa5eb7a5f9&ps_session=h74oql9jf4h6kcgef9e2i141j3&mod_title=product&setlang=deu#

I just got some 15 pieces of the 5300 and they are lovely... just charging them as we speak.

If you measure the mah you get out of them, please post it.

[Make-a-Wake]

I'll throw these out there for ya......................

You can choose your connector for $1.99 more, and can also choose your saddle jumper length.

http://www.promatchracing.com/proddetail.php?prod=4600-6M

[Darin Jordan]

Darin; I have to ask,,,,,Why????

(Using my best Edgar Martinez, Home Depot commercial voice)...

"I yave a yittle proyect... "

[Darin Jordan]

I'll throw these out there for ya......................

You can choose your connector for $1.99 more, and can also choose your saddle jumper length.

http://www.promatchracing.com/prodde...p?prod=4600-6M

Yah, but they are all out of stock... just like Horizon and others...

[CornelP]

If you measure the mah you get out of them, please post it.

Will do. I am welding them on monday, fully charge after that and run them in the weekend.

[T Nissen]

Hey Darin, I'm sure you already checked but Tower has Trinity cells in stock now according to their site. If you can wait for a couple of weeks they will have Associated cells in late March and Integy cells in early April.

Good luck and don't keep everyone in the dark for too long!

[Darin Jordan]

Hey Darin, I'm sure you already checked but Tower has Trinity cells in stock now according to their site. If you can wait for a couple of weeks they will have Associated cells in late March and Integy cells in early April.

Good luck and don't keep everyone in the dark for too long!

Thanks...

It's not really that big of a deal... I've put together a couple of M-2 boats to run for 2-Laps and SAWs, and only have two, albiet BRAND NEW, sets of 4-cell matched packs. Would like to get a couple more so I have what I need for this year.

I figure these classes are going away eventually, and I have a ton of equipment to support them, including 4 RC-Hydros 4-cell controllers, motors, etc., so I wanted to give it a shot.

First outting is this weekend down in Lakewood, WA, at the District 8 2-Lap event. Testing went well, so time to throw down and see where I end up.

[Meniscus]

Darin,

Try 'K.R.Joye' on RRR and let me know if/when you decide to retire some of these models.

[Darin Jordan]

Darin,

Try 'K.R.Joye' on RRR and let me know if/when you decide to retire some of these models.

Will do.

Likely will just hang onto these ones. Some things are just nice to have around!

The Mono with 4-cells in it is pretty fast for what's in there... Should give it a good run.

The Hydro still needs a little tinkering, but I was honing in on things this past weekend, so I'm fairly confident that it'll show well.

Also have an N1 Mono and N1 Hydro ready to go... I'm expecting some big things from those... as big as an N1 gets, anyhow!

Once I'm done boring everyone with these boats... I'll pull out my P-OPC boat and my N2-Mono. That should wake them up.

If all goes well, I'm going to series up the 4-cell packs, and run the N2-Mono as an O-Mono and go for that 2-Lap time as well...

Might be a full day!

[Ub Hauled]

Darin, are you coming down here at the end of the month?