Tweet
Looking for lipos for my N1 UFO mono hull. Rules state it has to be max of 2s and around 100amp + or - 10 %..So whats the most bang for my buck I can get in either saddle pack form or running 2 in parallel? Thanks!
-
-
How you configure the packs is up to you. Most of my hulls prefer that the weight be centered, and LOW in the V, but I do race saddled packs as well... If I was setting up the UFO hull, I'd try to run the pack in the center, if possible... setting the motor way at the back of the hull (just like the old-school NiMH setups were...)
If you are running brushed motors, I don't think, with the modern cells, that you'll need to parallel anything... you'll only be pulling 30-amps or so... Are you running a 27T motor, or a "Stock" Brushless ROAR setup??
Here is how my Maus Microbullet is setup. Pack goes in the middle, in front of the motor. Don't pay too much attention to the motor in this one... it's setup for M-Mono, not N1 at the moment...Darin E. Jordan - Renton, WA
"Self-proclaimed skill-less leader in the hobby."
Comment