Jeti ESC Question

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • illz302
    Banned
    • Sep 2009
    • 191
    #1

    Jeti ESC Question

    Ok I have bought a navy 50A and i intend to use it in a Velocity Cat Clone with the stock motor and a traxxas 2080 servo and tactic 2.4ghz radio system with turnigy 1800mah 3s 30c batts. First question do I need to program this esc or will it come ready to go? Second question there are two leads to the rx coming out and one is for if you are using a bec do I absolutely need this I have never used one before but I mostly have run on road and off road? Can I just hook the esc up with the one lead? Is there any benefit to the extra bec?
    Tags: None
    • illz302
      Banned
      • Sep 2009
      • 191
      #2
      Ok wow 35 views and no one has ever used a Jetti or etti or whatever its called esc Come on guys I just need a little bit of help here

        Comment

        • m4a1usr
          Fast Electric Addict
          • Nov 2009
          • 2038
          #3
          Last time I used one, I didnt have to program it for my throttle range. But I got mine used and the person before my might have had the same radio or throttle range. One of those leads is for use with the internal BEC, but you must be using 12 or less nimh cells connected to power. I think the speedo is good 16 nimh cells if I remember right. Did you get the program card?

          John
          Change is the one Constant

            Comment

            • illz302
              Banned
              • Sep 2009
              • 191
              #4
              Program card? NO I bought this used from another member here and i just wanted to hook it up like a regular system to a rx and run a 3s in my Velocity Cat.

                Comment

                • m4a1usr
                  Fast Electric Addict
                  • Nov 2009
                  • 2038
                  #5
                  After thinking about it a bit more I bet you do have to program it for your throttle range. I just got lucky when I got mine. If you dont have the instructions for it let me look thru my library. I bet I have a copy saved.

                  John
                  Change is the one Constant

                    Comment

                    • illz302
                      Banned
                      • Sep 2009
                      • 191
                      #6
                      that would be great thanks M4

                        Comment

                        • m4a1usr
                          Fast Electric Addict
                          • Nov 2009
                          • 2038
                          #7
                          This is a link to the instructions I have. Should work for you.

                          John


                          PAGE NOT FOUND | AXI MODEL MOTORS s. r. o.
                          http://www.modelmotors.cz/download/Advance_plus_eng.pdf
                          Change is the one Constant

                            Comment

                            • ENCORE MAN
                              Senior Member
                              • Jan 2010
                              • 891
                              #8
                              Hi, i wish you had contacted me directly as i could have saved you some grief. When i listed this esc, i mentioned that it uses a proboat program card which is exactly the same as the more expensive jetti version. The extra wire on the esc is an accuss wire used for programming. You can get a card from steve for $20. That being said, i believe the program i last used was set at no brake,soft start up,timing for two pole motor and lipo with 3.2 v/s cuttoff. If this is not the case, you will need a program card. Bg

                                Comment

                                Previous template Next
                                Working...