Ok so this boat...
is the same exact thing as the Velocity Cat from MCR so Jim feel free to chime in here for me.
I recently purchased this boat on ebay and it came to me and when i put my 3s in it and run it sometimes when i pull the throttle to full it runs out at about 75% power and seems to die down to 0% even though im still holding the throttle on the tx wide open. Other times I pull the throttle wide open and it runs 100% normal like nothing is wrong then the next time i let off and turn same thing again but i have noticed that when I accelerate and let off if I do not let off more than to say still inputing 50% power on the tx then when I go back to WOT on the straight it works normal. Im wondering if this is a problem with the esc or does this boat need a pistix to work correctly?
BTW I have two 3s 30C 2650mah batts and one 2s 25C 4000mah batt and that same problem happens with all of the batteries
**UPDATE Here is a video of the problem in action excuse my bandaged finger i cut myself working on a friends project the other day
BTW the other hand is just holding it still so it doesn't vibrate off the stand but any suggestions guys?

is the same exact thing as the Velocity Cat from MCR so Jim feel free to chime in here for me.
I recently purchased this boat on ebay and it came to me and when i put my 3s in it and run it sometimes when i pull the throttle to full it runs out at about 75% power and seems to die down to 0% even though im still holding the throttle on the tx wide open. Other times I pull the throttle wide open and it runs 100% normal like nothing is wrong then the next time i let off and turn same thing again but i have noticed that when I accelerate and let off if I do not let off more than to say still inputing 50% power on the tx then when I go back to WOT on the straight it works normal. Im wondering if this is a problem with the esc or does this boat need a pistix to work correctly?
BTW I have two 3s 30C 2650mah batts and one 2s 25C 4000mah batt and that same problem happens with all of the batteries
**UPDATE Here is a video of the problem in action excuse my bandaged finger i cut myself working on a friends project the other day
BTW the other hand is just holding it still so it doesn't vibrate off the stand but any suggestions guys?
Comment