Tx lipo's

[DPeterson]

Need help finding a source for 3S Lipo packs that will fit in the Futaba 3PJ transmitters. The dimmensions of these packs have to be something like 100mmL x 50mmW x 15mmH. I know they exist as my buddy Dan has them. His sources are dried up.

Thanks - Doug

[m4a1usr]

The Turnigy 3S 1450mah should work. Never tried one but its dimensions look about right as well as the connector. And they are priced well.

John

[DPeterson]

Thanks John,

Thats a start. Was hoping to get into the 2,000 - 2,200 mah range.

Forgot to mention that.

Doug

[TRUCKPULL]

Doug
There are three here.
2620mAh

http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=7346&Product_Name=Rhino_2620mAh_3S_11.1v_Transmitter_Lipoly_Pack

2500mAh

http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=6955&Product_Name=ZIPPY_Flightmax_2500mAh_Transmitter_Pack_%28Futaba/JR%29

1450mAh

http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=9787&Product_Name=Turnigy_1450mAh_3S_11.1v_Transmitter_Lipoly_Pack

Larry

[DPeterson]

Thanks Larry.

Looks as though the 1450 mah's is all that fits my radio.

Doug

[properchopper]

Doug, this pack fits in my 3PM with room to spare. 100mm x 43mm x 17mm.
Nice job at the race BTW. Your Whip's got me thinking, 'tho I'm not sure how well Bondo sticks to wood

[DPeterson]

WOW Tony, that would be the one.

What plugs did you have put on this?

Doug

[properchopper]

Comes with a JST. Plug & Play. No balance tap, but with minimal draw from the Tx, no real demands put on the batt. I scratched a [ - ] by the recepticle inside the Tx to remind me of which way to plug it in.