reading you forums,rants, and rave's i have learned alot!i have a traxxas blast speedmaster strut flexshaft . i scrapped a550 car motor plan. a 20 amp esc plan! i learned about water and electronics is not so good. currently i am running a graupner 600 with 1980 cons. 50 amp esc. 10 c 13.6v homade pack. my ques is my boat prob does 25-28 ? when do i hit the end of the road with this hull ? what hull is next? i like speed but also like reliable boat.would love to build hull from kit or plans any advice? thanks not so green blast.
learning alot!
Collapse
X
-
Tags: None
-
Greenblast, have you looked at this setup? It is fast and reliable.
http://forums.offshoreelectrics.com/...read.php?t=751ReddyWatts fleet photo
M1 Supercat - Neu 1527 1Y, 8s / Mean Machine- Feigao 580, 8s, 120 HV esc
Mean Machine - Feigao 540 14XL, 8s, 100 amp HV esc, X537/3 -
thanks for response!
Reddy seen your response how do you do the cf inside of you hulls is there a forumn i could read . I think i would like to play with this hull some more. i took it out today and she was screaming! for me any how!!. i ran a 6c and 4c till dumping. motor batt. and esc were ice cold. so i know there is alot more in this set up.was windy here with pretty good chop.bout was proped down a bit but hooked up awesome . would stil love to build new hull ! lipo and brushless are out of ? right now , supporting young family.i have to put priortys in order.Comment
-
ReddyWatts fleet photo
M1 Supercat - Neu 1527 1Y, 8s / Mean Machine- Feigao 580, 8s, 120 HV esc
Mean Machine - Feigao 540 14XL, 8s, 100 amp HV esc, X537/3Comment
Comment