Hi-model 200 8s?

[daveives]

How to search Digi-Key for FETS to get Voltage Limit

http://search.digikey.com/scripts/DkSearch/dksus.dll

Keywords
PowerTrench FDD
Search again

click on
MOSFETs - Single (196 items)

N-Channel
Logic Level Gate
Tape & Reel (TR)
Apply filters

You have selected 71 items, spanning 3 pages.

View Page 1
Next
Next

[ray schrauwen]

I see but, the toughest fet there is the 8896, 30V @ 94A, all others fall below in amp load.

If an esc has a higher voltage rated Fet (of this style fet FDD) then current handling drops significantly.

[ray schrauwen]

This is why you will see a Suppo 80 amp HV. I can bet dollars to donuts its using the higher voltage 50 amp fets. Same 3 layers, just different fets and bigger caps to follow...

[ray schrauwen]

To get a higher voltage, higher current esc, you need to use more HV fets or(castle), larger case fets(Schulze, Turnigy Monster). Part #'s I have yet to discover.

I might, might peek, at the fets on my Monster 2000, that would mean void warranty and, hope I can resolder it all...

[wolf IV]

To get a higher voltage, higher current esc, you need to use more HV fets or(castle), larger case fets(Schulze, Turnigy Monster). Part #'s I have yet to discover.

I might, might peek, at the fets on my Monster 2000, that would mean void warranty and, hope I can resolder it all...

DO IT , DO IT IM ORDERING 6 MORE MYSTERY'S FORNOW BUT REALLY WANT TO SEE HOW THESE MONSTERS PERFORM!!! THANKS GUYS FOR ALL THE INPUT. IVE HAD REALLY GOOD LUCK WITH REGULAR OLD 2 PT EPOXY FROM HOBBY CITY... A LITTLE SILOICONE AROUND THE LEADS IN A GREAT IDEA.

[Brushless55]

I need to take a closer look at my 100A esc, cuz the cap says 50V
I wonder if that sucker can take 10s or more?
I would love to try 10s in a new plane I picked up last weekend!

[bwells]

10s? what kind of wing span and what Mah?

[Brushless55]

63" wingspan
sport flying I wil be using 6s 5000mah packs and a 15x7 prop
I will for sure try 8s with a 12x14 prop

[bwells]

That is BIG, more power to ya

[Brushless55]

Thak you, I'm hoping for 145mph+ on 8s in a straight line pass
and close to 200mph in a dive!

[wolf IV]

CRAZY!!! have you seen my vid of my t-28d doing 85 mph?http://www.youtube.com/watch?v=f3swnLkh9xs haAH.. I FORGOT YOU REPLIED ON THIS VID... SO YOU GOT A FAST PLANE IT LOOKS LIKE!!!!!! REALLY FAST!!! BETTER VIDEO , AND HAVE LOTS OF SPACE!!!!!!!!!!!!!!!!

[Brushless55]

CRAZY!!! have you seen my vid of my t-28d doing 85 mph?http://www.youtube.com/watch?v=f3swnLkh9xs haAH.. I FORGOT YOU REPLIED ON THIS VID... SO YOU GOT A FAST PLANE IT LOOKS LIKE!!!!!! REALLY FAST!!! BETTER VIDEO , AND HAVE LOTS OF SPACE!!!!!!!!!!!!!!!!

That's you!
well about a week later I bought a Sundowner 50, and will build it soon

[ray schrauwen]

Thats why I only use Silicon conformal coating. Its like water, goes on with eye dropper. No problems so far.

It's only a last ditch thing for me anyway since its rare I get a boat soaked.

[RcBum]

I need to take a closer look at my 100A esc, cuz the cap says 50V
I wonder if that sucker can take 10s or more?
I would love to try 10s in a new plane I picked up last weekend!

got one of them nice plane did you say you want to run 10s setup in it ?? what motor will you be running in it

[ray schrauwen]

10S should be a quick and spectacular light show of pyrotechnics on the HiModel esc.

Can you say Smokin' !