Tweet
re :
I'll be needing one for the 1521 series ! Any update ?
I'll be needing one for the 1521 series ! Any update ?
-
2008 NAMBA P-Mono & P-Offshore Nat'l 2-Lap Record Holder; '15 P-Cat, P-Ltd Cat 2-Lap
2009/2010 NAMBA P-Sport Hydro Nat'l 2-Lap Record Holder, '13 SCSTA P-Ltd Cat High Points
'11 NAMBA [P-Ltd] : Mono, Offshore, OPC, Sport Hydro; '06 LSO, '12,'13,'14 P Ltd Cat /Mono -
I just spoke to the machinist. The first proto was done, but the threaded area for the nipple was too thin. We are looking for appropriate material, where is we don't have to completely machine a cylinder. To cut down on machine time.Steven Vaccaro
Where Racing on a Budget is a Reality!Comment
-
Whats 2 hours worth of machine time worth for each jacket? Probably more than people will want to pay. He thinks he found another supplier for different material.
I have another question. Will a jacket for a 15 size can motor with a 1.9" outside diameter be to large?Steven Vaccaro
Where Racing on a Budget is a Reality!Comment
-
If you have a small piece of the stock Ill try to fit on my three boats (all with different mounts) with these motors.NAMBA #581
Q mono NAMBA record holder
'REMEMBER SOME PEOPLE ARE ALIVE SIMPLY BECAUSE IT IS ILLEGAL TO SHOOT THEM'Comment
-
I will keep you updated. Right know the sample stock is on order.Steven Vaccaro
Where Racing on a Budget is a Reality!Comment
-
Ok let me know what I can do to help!NAMBA #581
Q mono NAMBA record holder
'REMEMBER SOME PEOPLE ARE ALIVE SIMPLY BECAUSE IT IS ILLEGAL TO SHOOT THEM'Comment
-
Steven,
Just for reference, the Carbon Fiber cooling jackets that I here have the following dimensions:
Length = 2"
O.D. = 1.865"
I.D. = 1.750
These are for the smooth cans... not finned...
I'll e-mail you some more info...Darin E. Jordan - Renton, WA
"Self-proclaimed skill-less leader in the hobby."Comment
-
Is it the one from Australia(Kuhler)? If not it has the same measurements. It will fit the finned case. You have to cut 2 or so lines down the fins for the water to flow. But it fits over the fins fine with about 1mm clearance all the way around. I had one one a 1509 F, it fit fine and looked good. But I dropped it (less than 3 feet) and broke one of the nipples off.
Home of the fastest N2 El Lobo in the world.
3.931 sec, 57.23 MPH @ Blue Lake, Valdosta, GAComment
-
With the material we can order, the jackets would weight between 3-4 ounces. Would that be an issue?Steven Vaccaro
Where Racing on a Budget is a Reality!Comment
-
Weight is not an issue for me with my Cat and using LiPos.Comment
-
No Issue here Steven!!
Build away!!!NAMBA #581
Q mono NAMBA record holder
'REMEMBER SOME PEOPLE ARE ALIVE SIMPLY BECAUSE IT IS ILLEGAL TO SHOOT THEM'Comment
-
a 3-4 ounce weight gain in proper cooling equipment is alot better than 3-4 ounces of water let in from the leaky silicone water jackets!!Comment
-
Actually it would help weight forward in my Whiplash.
1515 1Y
Nortavlag Bulc Comment
-
The wight is fine here too. The boat is 45" long, going to have 10s 2p, and has 2 motors anyway, an extra 8 oz isn't going to matterHome of the fastest N2 El Lobo in the world.
3.931 sec, 57.23 MPH @ Blue Lake, Valdosta, GAComment
Comment