Timing numbers to use on a Black Jack motor

[TRUCKPULL]

I am looking to find the timing numbers to use on a Black Jack motor??

With a Black Jack ESC all you get is LOW and HIGH

I want to use a CC 80 ESC
What timing should I use for LSO class??
What timing should I use for LSH class??

Larry

[properchopper]

Larry, I've got my Titan 29 set up for P-Spec LSO with the Blackjack motor and a CC 80 [ watercooled, heavy batt wires & big caps] running Turnigy 4S 3600 2P. Since rumor has it that the Blackjack speedo is 11 degrees advance, I set the CC 80 to 11 degrees also. I have a humongo fan blowing on the motor & SC, BTW. With a hub-cut X442, temps after 3.5 mins were good and batt consumption was adequate for 4 min + full mill. I now have de-tounged the X442 & mildly cupped it & set the CG back @ 3/4 inch to loosen it up some. Should be better, I'll know more Sunday & Eagle tree again.

LSH boats run way looser so a few more degrees shouldn't hurt temps. Depends a lot on prop loading.

[TRUCKPULL]

Thank You Tony
Let me know after SUN.

Larry

[tiletony]

larry are you running the blackjack motor or the entire boat?

[TRUCKPULL]

I run a Titan 29 in LSO right now.

Larry

[sailr]

run the 6 pole Aquacraft and BJ motors at 11-12 degrees timing.