stinger strut bushing

[skidooguymxz550]

i lost my whole driveline to the murky depths of our bay. i've been able to locate all the parts i need at other sites except a 3/16 stinger strut bushing.

does anybody know where i can find one?

[Doug Smock]

i lost my whole driveline to the murky depths of our bay. i've been able to locate all the parts i need at other sites except a 3/16 stinger strut bushing.

does anybody know where i can find one?

Yes sir, http://www.rossisales.com/
Or take a trip to your LHS and pick up a 7/23nd brass tube and make one.
If you don't have any means of flaring the end a bit, pick up a 1/4" tube as well.
You can cut a 1/8" or smaller piece of 1/4"tube and solder it to the end of your bushing. This will keep it from going too far into the strut.

Hope this helps,
Doug

[skidooguymxz550]

wow thanks alot. can't seem to find the bushing i'll need so i'll have to make one

[Doug Smock]

wow thanks alot. can't seem to find the bushing i'll need so i'll have to make one

You're welcome!
Good luck,
Doug :)

[Gilbequick]

They're sold here at OSE if you don't want to make one: http://www.offshoreelectrics.com/pro...ros-187sting-b