This brushed esc?

[Brushless55]

Looking for help..
I'm looking to replace the esc in my Rio ep using the stock 550 can..
I found this little esc that can run 2s and 3s and it's only 8 bucks!
do you all think it would work just fine?

http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=6468

[screwball]

ive been contemplating buying a couple of those for some time now and on my next order i am, so i can get my reef racer running again.... with 3s lipo muahahahaha lmao

[Brushless55]

Sweet!
I'm thinking 30A is more than enough?

[defsaturn6501]

this should handle a 27t stock motor on 6 cells without thermaling? ya think?

[Karfrik]

This sounds great and cheap at the same time!!.So can it be used then? what size and capacity 2S or 3S are we talking here?.........I`m on this too!!

[TRUCKPULL]

Will it work with a Pistol radio??
or is it for Stick radio's only?? you can get an adapter for this.

Larry

[Brushless55]

Will it work with a Pistol radio??
or is it for Stick radio's only?? you can get an adapter for this.

Larry

That's a good question I did not think of..

[westbeach]

I have a couple of those brushed esc, I think you need the pistik in order for it to work. I bought it for my sons Villian, but then realized. I will sell these, as I don't need them anymore. Brand new.

[screwball]

ill take one or two!!!!

how many do you have?

[BILL OXIDEAN]

The 30 amp version will work but its definitely not more than enough.
I'm glad there are brushed escs still available for guys

[Karfrik]

so finally,do we need a "PISTIX" in order to make it work on our Pistol radios?......have anyone verified this for sure?......thanks guys,....Al

[BILL OXIDEAN]

I doubt a pistix will be needed since the esc has brakes it was designed for surface use. Pistix are to convert plane controllers

[Karfrik]

You must be right!!! it has brakes!!!,...thanks

[Brushless55]

looks like I may get one then..

[Karfrik]

for the cost of shipping do yourself a favor and get 2!!!!......thats what i`ll be doing,..........Al