What Hull Will Work With This Motor?

[hallsboats]

Hi people.
im wondering if you can help me, if you know what hull will be perfect with this motor ect
Motor-Brushless FDS motor (kv2770) (amps110) length=75mm width=50mm with watercool jacket.

Props , i have two probs .. 45mm 1.4 pitch and 40mm 1.6pitch

batterys . got a few around the shed.
18v makita drill battery 3.0amh
a few of 7.2v 6cell 3000nimh

any idea what hull will be good with the spec ?
thanks
james

[Steven Vaccaro]

The 18 cell pack is to many volts. On (2) 6 cells packs it would be good with a hydro in the 24 or so inch range.

[hallsboats]

how much am i looking round . for one of them hulls ?

[Steven Vaccaro]

I don't have any, so I'm not sure.

[sailr]

It would also work in the 25" DF clone! Stay with the 40mm prop with that motor. I know basically what you have. The Chinese are pumping those motors out to be run on 3S, 11.1V Lipos.

[hallsboats]

oh right. you got any link for the 25" DF clone hull ??
so i should run it on 11.1V Lipos ?

[bustitup]

oh right. you got any link for the 25" DF clone hull ??
so i should run it on 11.1V Lipos ?

heres a link to a great deal on a 25" df clone

http://forums.offshoreelectrics.com/...d=1#post141121