Good size rigger for this setup.

[REBAR]

I have a water cooled Hacker B20 22s and would like to use it to power a JAE rigger.

I want to scratch build the tub around the battery I choose which I think will be a Neu XPi 2S 4100 or 3600 mah pack.

This motor is pretty hot at 4091kv on 2s.

Is this going to be a saw only motor? 1s? And what length should I size the plans to?

Thanks

[teach]

What I did was download the .21 plans from one of the links and move the booms back a little and increase the tub depth. If you want them I can email them to you. Then Zippykits said "hey we are making an FE kit" so I gave up on that plan too lol.

[REBAR]

The 21 would be way to big Tino. The motor is a 280 size so my guess would be 14"-16" tub max

http://www.hackerbrushless.com/motorDetails.aspx?series=B20

[teach]

Wow that's a tiny motor. That would awsome in a rigger.

[jcald2000]

How about the JAE 12G might be the right size.

http://ne-stuff.blogspot.com/2009/04/jap-12g-heat-racing-hydroplane.html