CC80 program

[Superveekiller7]

anyone know how to program a cc80 for 5s lipo??

[NorthernBoater]

You have to get the computer link.

[Superveekiller7]

yes i ordered one But i will be able to program voltage cut off for 5s for sure right?? and what is the cut of for 5s??

[NorthernBoater]

Here is a screen shot of the castle link software that shows all the user settings. for 5s I would recommend a cutoff of 16 and 16.5 V.

[Superveekiller7]

well i just came back fomr running my titan and i used the cc80 with 16 nimh and the srink rap melted i think its time for me to switch it and get a hydra 120

[NorthernBoater]

Did you install the water cooling plates on the cc80?

[Superveekiller7]

niope one more question for my titan with 9 xl iv got a regualr servo in there that was 8.99$ its a hitec standard servo but i can seem to turn left with the boat does that mean i need a hi torque servo??

[Superveekiller7]

i repeat iv got a 8XL motor ********

[NorthernBoater]

The cc80 probally can not handle the current draw of the 8XL on 5s LiPo. Can you turn left and right when the boat is not in the water.

[saleens7]

.................

[FE_Chris]

NB, What prop are you using for the 8xl? Do you have a gear drive?

[Superveekiller7]

nope direct drive prather 215

[FE_Chris]

Hmmmm.....Not sure how that prop is gonna work out for ya. I am getting a 9xl here soon, and I am being told to run SMALL props on 18 cells. Like the x438, x440, and the six series of props.

IMO I would think that would draw a lot of amps unless you only used 12 cells o14 maybe.

Maybe someone else can chime in on this. I would think a 8xl would fry a cc80 unless setup perfectly.

[Superveekiller7]

well it did fry the cc80 so i have ordered a hydra120 and i think a prather 215 is great its a very small prop and great pitch