Trim tab position on 31" mono

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • arrowskartax9
    Senior Member
    • Oct 2009
    • 130

    #1

    Trim tab position on 31" mono

    Hello, I want to fit outer trim tabs to my boat. It has a twin rudder setup.
    Could anyone please advise of the correct mounting position on the transom.
    Thanks,
    Chris.
  • Rumdog
    Fast Electric Addict!
    • Mar 2009
    • 6453

    #2
    Could you upload a pic or two of your boat?

    Comment

    • arrowskartax9
      Senior Member
      • Oct 2009
      • 130

      #3
      31" mono trim tabs

      Thanks for replying, here are some photos.
      Last edited by arrowskartax9; 02-15-2011, 05:33 AM.

      Comment

      • westbeach
        OSE Rocks!
        • Feb 2008
        • 951

        #4
        Have you ran the boat yet? It looks like the hull have a pretty deep vee. Unless you're having issues trimming the boat then trim tabs might be the last resort. Move the batteries fwd/aft depending on your CoG. Your strut should be adjustable as well. Try those first.

        Originally posted by arrowskartax9
        Hello, I want to fit outer trim tabs to my boat. It has a twin rudder setup.
        Could anyone please advise of the correct mounting position on the transom.
        Thanks,
        Chris.
        HPR115 x2 ,Dark Horse Shovel, Delta Force CyberStorm, Delta Force Sniper 23-RTR:

        Comment

        • G Doggett
          Senior Member
          • Apr 2007
          • 446

          #5
          Hi there.
          Good to see another Rio Roses boat being set up.
          Attached is a photo of my set up, but to be honest the trim tabs are probably not needed.
          Run it first without them and see.
          Good luck
          Graham.
          Attached Files

          Comment

          • arrowskartax9
            Senior Member
            • Oct 2009
            • 130

            #6
            Ok, i will give the boat a run with out the trim tabs and see how it goes.
            Thanks for the replies, I will keep you updated.
            Chris.

            Comment

            Working...