Yeah I measured the area where it would be going. I just got a 2s for now. I also ordered my motor a Turnigy 28-45 3600kv Brushless Inrunner (WaterCooled). I just have find a decent esc I can afford.
Its actually 6s 30C 2650mah, and I've decide to connect in parallel with the same battery, which gives a total of 60C 5300mah. Can my seaking 60A(burst 120A)handle this?Im actually going to setup on my drifter s using feigao 12xl with x437/3 prop, and it will be 55 amp draw with that prop.
Stiletto tunnel,EPV135 (53") twin cat, CT06"Spirit of Qatar", FD 47" mono, Twin Mini Cat 23.5"
I would go with a higher amp ESC. Your packs are capable of delivering over 300 amps.
60 X 5.3 = 318 amps. However, your continuous draw will be only 55 amps. You will get longer run times. But your peaks could be much higher. You really don't want to run an ESC more than 70% of it's maximum voltage or amperage.
Government Moto:
"Why fix it? Blame someone else for breaking it."
I would go with a higher amp ESC. Your packs are capable of delivering over 300 amps.
60 X 5.3 = 318 amps. However, your continuous draw will be only 55 amps. You will get longer run times. But your peaks could be much higher. You really don't want to run an ESC more than 70% of it's maximum voltage or amperage.
Ok, thanks for the info, I guess I need higher amp esc for this setup
Stiletto tunnel,EPV135 (53") twin cat, CT06"Spirit of Qatar", FD 47" mono, Twin Mini Cat 23.5"
Its actually 6s 30C 2650mah, and I've decide to connect in parallel with the same battery, which gives a total of 60C 5300mah. Can my seaking 60A(burst 120A)handle this?Im actually going to setup on my drifter s using feigao 12xl with x437/3 prop, and it will be 55 amp draw with that prop.
Nope................that would be 30c at 5300mah..............159 cintinuous amps available.
Comment